Tripp Lite N784-H01-SCSM network media converter 100 Mbit/s 1310 nm Single-mode Black
- Brand: Tripp Lite
- Category:
- SKU: N784-H01-SCSM
- EAN: 0037332267030
Hardened Copper to Fiber Media Converter - 10/100 Mbps, RJ45/SC Singlemode, -10° to 60°C, 30 km (18.6 mi.)
Offer details
Description
Extends a Network Connection up to 30 km over SC Singlemode Fiber Optic Cable
This network media converter converts a copper Ethernet signal to a singlemode fiber optic signal and extends it to a second network device up to 30 kilometers (18.6 miles) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N784-H01-SCSM with singlemode fiber cable to reach hubs, switches and other 10/100Base-TX/FX network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling.
Monitor Your Installation with Link Fault Signaling and Loop Back Functions
Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off.
LEDs Indicate Installation Performance and Diagnostic Functions
Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power.
Protective Metal Housing Built to Withstand a Variety of Hazards
The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting.
Works in Tandem with Tripp Lite’s N785-CH12 Chassis
House and power up to 12 Tripp Lite media converters, including the N784-H01-SCSM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation.
TAA-Compliant for GSA Schedule Purchases
The N784-H01-SCSM is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
This network media converter converts a copper Ethernet signal to a singlemode fiber optic signal and extends it to a second network device up to 30 kilometers (18.6 miles) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N784-H01-SCSM with singlemode fiber cable to reach hubs, switches and other 10/100Base-TX/FX network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling.
Monitor Your Installation with Link Fault Signaling and Loop Back Functions
Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off.
LEDs Indicate Installation Performance and Diagnostic Functions
Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power.
Protective Metal Housing Built to Withstand a Variety of Hazards
The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting.
Works in Tandem with Tripp Lite’s N785-CH12 Chassis
House and power up to 12 Tripp Lite media converters, including the N784-H01-SCSM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation.
TAA-Compliant for GSA Schedule Purchases
The N784-H01-SCSM is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Specifications
Network | |
---|---|
Fiber optic connector | SC |
Auto-negotiation | Yes |
Cable types supported | Cat5, Cat5e, Cat6, Cat6a, Fiber |
Converter input interface | 10Base-T, 100Base-TX |
Networking standards | IEEE 802.3, IEEE 802.3u |
Ethernet LAN data rates | 10,100 Mbit/s |
Ethernet interface type | Fast Ethernet |
Converter output interface | 100Base-FX |
Auto MDI/MDI-X | Yes |
Maximum data transfer rate | 100 Mbit/s |
Technical details | |
Housing material | Metal |
Wavelength | 1310 nm |
Maximum transfer distance | 1181102.4" (30000 m) |
Fiber mode structure | Single-mode |
Internal | No |
Master (outer) case GTIN (EAN/UPC) | 10037332267037 |
Performance | |
Auto-negotiation | Yes |
Wavelength-division multiplexing (WDM) | Yes |
Wavelength | 1310 nm |
Maximum transfer distance | 1181102.4" (30000 m) |
Fiber mode structure | Single-mode |
Ports & interfaces | |
Connectivity technology | Wired |
Ethernet LAN (RJ-45) ports | 1 |
Fiber ports quantity | 1 |
Fiber optic connector | SC |
DC-in jack | Yes |
Indication | |
LED indicators | Yes |
Design | |
DIN rail mounting | Yes |
Country of origin | Taiwan |
Housing material | Metal |
LED indicators | Yes |
Product colour | Black |
Certification | CE, FCC, RoHS |
Internal | No |
Power | |
Input voltage | 100 - 240 V |
Input current | 0.5 A |
Output voltage | 12 V |
Output current | 1.5 A |
External power adapter | Yes |
AC input frequency | 50 - 60 Hz |
Packaging content | |
Package type | Box |
Quick installation guide | Yes |
AC adapter included | Yes |
Colour | |
Product colour | Black |
Weight & dimensions | |
Width | 2.91" (73.8 mm) |
Depth | 4.3" (109.2 mm) |
Weight | 8.47 oz (240 g) |
Height | 0.921" (23.4 mm) |
Package depth | 7.2" (182.9 mm) |
Package width | 9.17" (232.9 mm) |
Package height | 2.44" (62 mm) |
Package weight | 21.2 oz (600 g) |
Operational conditions | |
Operating temperature (T-T) | -10 - 60 °C |
Storage temperature (T-T) | -40 - 80 °C |
Operating relative humidity (H-H) | 5 - 95% |
Storage relative humidity (H-H) | 5 - 95% |
Packaging data | |
Package type | Box |
Package depth | 7.2" (182.9 mm) |
Package width | 9.17" (232.9 mm) |
Package height | 2.44" (62 mm) |
Package weight | 21.2 oz (600 g) |
Certificates | |
Certification | CE, FCC, RoHS |
Logistics data | |
Master (outer) case width | 15.4" (389.9 mm) |
Master (outer) case length | 19.7" (500.1 mm) |
Master (outer) case height | 14.4" (365 mm) |
Master (outer) case gross weight | 26.5 lbs (12 kg) |
Products per master (outer) case | 20 pc(s) |