Tripp Lite N785-H01-SCMM network media converter 1000 Mbit/s 850 nm Multi-mode Black
- Brand: Tripp Lite
- Category:
- SKU: N785-H01-SCMM
- EAN: 0037332267047
Hardened Gigabit Fiber to Ethernet Media Converter, 10/100/1000 Mbps, RJ45/SC Multimode, -10° to 60°C, 500 m (1640 ft.)
Offer details
Description
Extends a Network Connection up to 500 m over SC Multimode Fiber Optic Cable
This network media converter converts a copper Gigabit Ethernet signal to a multimode fiber optic signal and extends it to a second network device up to 500 meters (1640 feet) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-H01-SCMM with multimode fiber cable to reach hubs, switches and other network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling.
Monitor Your Installation with Link Fault Signaling and Loop Back Functions
Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off.
LEDs Indicate Installation Performance and Diagnostic Functions
Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power.
Protective Metal Housing Built to Withstand a Variety of Hazards
The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting.
Works in Tandem with Tripp Lite’s N785-CH12 Chassis
House and power up to 12 Tripp Lite media converters, including the N785-H01-SCMM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation.
TAA-Compliant for GSA Schedule Purchases
The N785-H01-SCMM is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
This network media converter converts a copper Gigabit Ethernet signal to a multimode fiber optic signal and extends it to a second network device up to 500 meters (1640 feet) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-H01-SCMM with multimode fiber cable to reach hubs, switches and other network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling.
Monitor Your Installation with Link Fault Signaling and Loop Back Functions
Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off.
LEDs Indicate Installation Performance and Diagnostic Functions
Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power.
Protective Metal Housing Built to Withstand a Variety of Hazards
The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting.
Works in Tandem with Tripp Lite’s N785-CH12 Chassis
House and power up to 12 Tripp Lite media converters, including the N785-H01-SCMM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation.
TAA-Compliant for GSA Schedule Purchases
The N785-H01-SCMM is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Specifications
Network | |
---|---|
Fiber optic connector | SC |
Auto-negotiation | Yes |
Cable types supported | Cat5, Cat5e, Cat6 |
Networking standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z |
Ethernet LAN data rates | 10,100,1000 Mbit/s |
Ethernet interface type | Fast Ethernet, Gigabit Ethernet |
Auto MDI/MDI-X | Yes |
Maximum data transfer rate | 1000 Mbit/s |
Technical details | |
Housing material | Metal |
Wavelength | 850 nm |
Maximum transfer distance | 19685" (500 m) |
Fiber mode structure | Multi-mode |
Internal | No |
Master (outer) case GTIN (EAN/UPC) | 10037332267044 |
Performance | |
Auto-negotiation | Yes |
Wavelength-division multiplexing (WDM) | Yes |
Wavelength | 850 nm |
Maximum transfer distance | 19685" (500 m) |
Fiber mode structure | Multi-mode |
Ports & interfaces | |
Connectivity technology | Wired |
Ethernet LAN (RJ-45) ports | 1 |
Fiber ports quantity | 1 |
Fiber optic connector | SC |
DC-in jack | Yes |
Indication | |
LED indicators | Yes |
Design | |
DIN rail mounting | Yes |
Country of origin | Taiwan |
Housing material | Metal |
LED indicators | Yes |
Product colour | Black |
Certification | CE, FCC, RoHS |
Internal | No |
Power | |
Input voltage | 100 - 240 V |
Input current | 0.5 A |
Output voltage | 12 V |
Output current | 1.5 A |
Power consumption (typical) | 1.8 W |
External power adapter | Yes |
AC input frequency | 50 - 60 Hz |
Packaging content | |
Package type | Box |
Quick installation guide | Yes |
AC adapter included | Yes |
Colour | |
Product colour | Black |
Weight & dimensions | |
Width | 2.91" (73.8 mm) |
Depth | 4.3" (109.2 mm) |
Weight | 8.47 oz (240 g) |
Height | 0.921" (23.4 mm) |
Package depth | 7.2" (182.9 mm) |
Package width | 9.17" (232.9 mm) |
Package height | 2.44" (62 mm) |
Package weight | 21.2 oz (600 g) |
Operational conditions | |
Operating temperature (T-T) | -10 - 60 °C |
Storage temperature (T-T) | -40 - 85 °C |
Operating relative humidity (H-H) | 5 - 95% |
Storage relative humidity (H-H) | 5 - 95% |
Packaging data | |
Package type | Box |
Package depth | 7.2" (182.9 mm) |
Package width | 9.17" (232.9 mm) |
Package height | 2.44" (62 mm) |
Package weight | 21.2 oz (600 g) |
Certificates | |
Certification | CE, FCC, RoHS |
Logistics data | |
Master (outer) case width | 15.4" (389.9 mm) |
Master (outer) case length | 19.7" (500.1 mm) |
Master (outer) case height | 14.4" (365 mm) |
Master (outer) case gross weight | 26.5 lbs (12 kg) |
Products per master (outer) case | 20 pc(s) |