Tripp Lite B127A-1A1-BDBH AV extender AV transmitter & receiver Black

Tripp Lite B127A-1A1-BDBH AV extender AV transmitter & receiver Black

  • Brand: Tripp Lite
  • Category:
  • SKU: B127A-1A1-BDBH
  • EAN: 0037332258656
DisplayPort to HDMI over Cat6 Extender Kit, KVM Support, 4K 60Hz, 4:4:4, USB, PoC, HDCP 2.2, 230 ft., TAA

Trade Prices

Distributor Product SKU Stock Updated Price
Ingram Micro DISPLAYPORT TO HDMI OVER CAT6 8JU670 Register free see stock
ScanSource DP TO HDMI CAT6 EXTENDER KIT POW-B127A1A1BDBH
TD Synnex DISPLAYPORT HDMI OVER CAT6 EXTENDER KIT 6085835

Related Products

Description

DisplayPort to HDMI Extender Kit Ideal for Digital Signage in Schools and Lecture Halls
This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.

Extends a 4K A/V Transmission up to 230 ft.
The B127A-1A1-BDBH extends 4K signals from a DisplayPort source device to an HDMI display up to 230 feet away via user-supplied Cat6 cabling. By adding a B127A-010-H HDMI repeater or B127A-110-BH transceiver (sold separately) to the application, you can extend the signal up to 400 or 460 feet, respectively.

Transmits Crystal-Clear 4K Video with Multi-Channel Audio and 4:4:4 Color
The B127A-1A1-BDBH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.

Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.

Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks
After you connect the included external power supply to either the transmitter or receiver, Power over Cable (PoC) technology powers the opposite unit over Cat6 cable. LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place one unit where needed without worrying about finding a nearby AC outlet.
Dip Switch Extends Your Choice of Either USB or IR.
The DIP switches on both the transmitter and receiver can be adjusted to let you choose from the USB 1.1 or bi-directional IR functions. Choose to either control the source device via keyboard and mouse or IR remote control from the display end of the installation. Only one function can be extended at a time.

Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing both units on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied DisplayPort cable (such as P580-Series). Then connect the receiver to the display with a user-supplied HDMI cable (such as P568- or P569-Series). Finally, connect the two units with user-supplied Cat6 patch cable (such as N202-Series).

TAA-Compliant for GSA Schedule Purchases
The B127A-1A1-BDBH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Specifications

Features
MaterialMetal
HDCPYes
Colour depth36 bit
Audio output channels7.1 channels
Wall mountableYes
Rack mountingYes
Consumer Electronics Control (CEC) supportYes
3DYes
Maximum refresh rate60 Hz
CertificationTAA
TypeAV transmitter & receiver
Maximum resolution3840 x 2160 pixels
Cable types supportedCat5, Cat5e, Cat6, HDMI
Maximum transfer distance2759.8" (70.1 m)
Audio systemMultichannel
LED indicatorsYes
Cable length54.3" (1.38 m)
Product colourBlack
Extended display identification data (EDID)Yes
HDCP version1.4/2.2
Ports & interfaces
Remote (IR) output2
Remote (IR) input2
USB ports quantity3
DisplayPorts in1
USB version1.1
USB connector typeMicro-USB, USB Type-A
RJ-45 input ports1
RJ-45 output ports1
HDMI in1
Number of HDMI outputs1
HDMI version2.0
DC-in jackYes
Connectivity technologyWired
Digital audio optical out1
Power
Input current0.6 A
Output current1 A
AC input voltage100 - 240 V
AC input frequency50-60 Hz
Operating voltage24 V
Operational conditions
Operating relative humidity (H-H)0 - 85%
Storage temperature (T-T)-15 - 50 °C
Operating temperature (T-T)0 - 40 °C
Weight & dimensions
Receiver weight16 oz (453.6 g)
Transmitter weight16 oz (453.6 g)
Transmitter dimensions (WxDxH)4.53 x 2.46 x 1.06" (115 x 62.4 x 27 mm)
Receiver dimensions (WxDxH)4.53 x 2.46 x 1.06" (115 x 62.4 x 27 mm)
Packaging data
Package typeBox
Package depth6.46" (164.1 mm)
Package width10.2" (260.1 mm)
Package height2.17" (55.1 mm)
Package weight23.3 oz (660 g)
Packaging content
Mounting kitYes
AC adapter includedYes
ManualYes
Included power plug typesAU, EU, NA, UK
Technical details
Country of originTaiwan
Sustainability complianceYes
Compliance certificatesCE, REACH, RoHS
Logistics data
Master (outer) case width22.6" (573 mm)
Master (outer) case length10.7" (273 mm)
Master (outer) case height6.89" (175 mm)
Master (outer) case gross weight15.2 lbs (6.9 kg)
Products per master (outer) case10 pc(s)
Master (outer) case GTIN (EAN/UPC)10037332258653