Tripp Lite B127A-1A1-BHPH AV extender AV transmitter & receiver Black

Tripp Lite B127A-1A1-BHPH AV extender AV transmitter & receiver Black

  • Brand: Tripp Lite
  • Category:
  • SKU: B127A-1A1-BHPH
  • EAN: 0037332258632
HDMI over Cat6 Extender Kit, Transmitter and Pigtail Receiver, 4K 60Hz, 4:4:4, PoC, HDR, HDCP 2.2, 230 ft., TAA

Trade Prices

Distributor Product SKU Stock Updated Price
D&H HDMI OVER CAT6 EXTENDER KIT B127A1A1BHPH Register free see stock
Ingram Micro HDMI OVER CAT6 EXTENDER KIT 8PV251
ScanSource HDMI OVER CAT6 EXTENDER KIT POW-B127A1A1BHPH
TD Synnex HDMI OVER CAT6 EXTENDER KIT 4K 60HZ HDR 6182170

Related Products

Description

HDMI Extender Kit Ideal for Digital Signage in Schools, Restaurants and Lecture Halls
This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The low-profile pigtail-type receiver is ideal for applications in which space around the display is restricted and a larger box-style receiver will not fit.

Extends a 4K A/V Transmission up to 230 ft....or More
The B127A-1A1-BHPH extends 4K signals from an HDMI source device to an HDMI display up to 230 feet away via user-supplied Cat6 cabling. By adding a B127A-010-H HDMI repeater or B127A-110-BH Transceiver (sold separately) to the application, you can extend the signal up to 400 or 460 feet, respectively.

Transmits Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color
The B127A-1A1-BHPH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.

Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.

Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers the receiver over Cat6 cable. LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receiver where needed without worrying about finding a nearby AC outlet.

Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing the transmitter on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied HDMI cable (such as P568- or P569-Series). Then, connect the pigtail receiver to the display with its built-in HDMI cable. Finally, connect the two units with user-supplied Cat6 patch cable (such as N202-Series).

TAA-Compliant for GSA Schedule Purchases
The B127A-1A1-BHPH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Specifications

Features
MaterialMetal, Plastic
Colour depth36 bit
Audio output channels7.1 channels
Wall mountableYes
Rack mountingYes
Consumer Electronics Control (CEC) supportYes
3DYes
Maximum refresh rate60 Hz
TypeAV transmitter & receiver
Maximum resolution3840 x 2160 pixels
Cable types supportedCat5, Cat5e, Cat6, HDMI
Maximum transfer distance2759.8" (70.1 m)
Audio systemMultichannel
LED indicatorsYes
Product colourBlack
Extended display identification data (EDID)Yes
Ports & interfaces
Remote (IR) output1
Remote (IR) input1
RJ-45 input ports1
RJ-45 output ports1
HDMI in1
Number of HDMI outputs2
DC-in jackYes
Connectivity technologyWired
Power
Input current0.6 A
Output current1 A
AC input voltage100 - 240 V
AC input frequency50-60 Hz
Operating voltage24 V
Operational conditions
Operating relative humidity (H-H)0 - 85%
Storage temperature (T-T)-15 - 50 °C
Operating temperature (T-T)0 - 40 °C
Weight & dimensions
Transmitter dimensions (WxDxH)4.53 x 2.46 x 1.06" (115 x 62.4 x 27 mm)
Receiver dimensions (WxDxH)1.85 x 2.95 x 0.732" (47 x 75 x 18.6 mm)
Packaging data
Package depth6.46" (164.1 mm)
Package width10.2" (260.1 mm)
Package height2.17" (55.1 mm)
Package weight23.3 oz (660 g)
Packaging content
Mounting kitYes
AC adapter includedYes
ManualYes
Included power plug typesAU, EU, NA, UK
Technical details
Country of originTaiwan
Sustainability complianceYes
Compliance certificatesCE, REACH, RoHS
Logistics data
Master (outer) case width22.6" (573 mm)
Master (outer) case length10.7" (273 mm)
Master (outer) case height6.89" (175 mm)
Master (outer) case gross weight15.2 lbs (6.9 kg)
Products per master (outer) case10 pc(s)
Master (outer) case GTIN (EAN/UPC)10037332258639